ULTRASONIC CLEANING MACHINE

Description

Model:- UD-UC-7

GENERAL INTRODUCTION
The Unident Ultrasonic Cleaner is an advanced cleaning device designed using modern international technology. It
provides fast, efficient and thorough cleaning of instruments using high-frequency ultrasonic vibrations.
This machine is widely used in:

 Dental clinics and hospitals
 Laboratories and research centres
 Optical lens cleaning
 Electronics servicing
 Hardware, galvanised parts and precision components
 Medical instrument cleaning
 Jewellery and watch service centres
 Manufacturing and automotive parts
The ultrasonic cavitation effect helps remove dirt, tissue debris, blood clots, polishing compounds and contaminants from
deep holes, serrations, slots, and hinged joints — areas where manual cleaning cannot reach effectively.

2. WORKING PRINCIPLE
The ultrasonic generator converts electrical energy into 50 kHz high-frequency mechanical vibrations using piezoelectric
transducers.
These vibrations create ultra-sonic longitudinal waves in the cleaning liquid. As these waves pass through, they alternate
between:
 Negative pressure zones → bubbles form and grow
 Positive pressure zones → bubbles collapse violently (cavitation)
When the bubbles collapse, thousands of micro-shockwaves strike instrument surfaces, penetrating into:
 Fine grooves
 Hinged joints
 Blind holes
 Serrations
 Complex geometries

This action removes contaminants rapidly, achieving an excellent cleaning and purification effect.
Automatic Degas Feature
The machine automatically performs a degas cycle in the first 2 minutes of operation.
This removes trapped air from the solution, improving cleaning efficiency.

3. TECHNOLOGICAL SPECIFICATIONS
Feature Specification
Tank Capacity 5 Litres
Internal Tank Size (mm) (240 x 140 x 150 )
Frequency 50 kHz
Ultrasonic Power 120 W
Heating Range 0°C – 80°C
Timer Range 1 – 99 minutes
Drainage Outlet Yes
Inner Tank Material High-quality stainless steel
Outer Body High quality Plastic
Basket Stainless steel
Power Supply 220–240V AC, 50/60Hz
Transducers 2 high-efficiency piezoelectric transducers

4. OPERATION METHOD
1. Check grounding
Ensure the power line and grounding connection are safe.
2. Add cleaning solution
o Fill up to 3/4 th of the tank height.
o Use appropriate ultrasonic cleaning solutions.
3. Insert power plug
Connect the machine to a suitable power outlet.
4. Set the cleaning time
Select between 1–99 minutes depending on contamination.
5. Set the temperature
Adjust between 0–80°C as required.
6. Start the machine
Press START/STOP.
o The first 2 minutes run in automatic degas mode.
o Once bubbles stabilize, cavitation begins.
7. Place instruments in the basket
Do not place items directly on the tank bottom.
8. For heavy or complex items
Use a hanger or avoid stacking to improve exposure.
9. After cleaning
Remove instruments and rinse with distilled water if needed.
10. After use
Drain the tank through the outlet and wipe the body clean.

5. LED TEMPERATURE AND TIMER OPERATION
1. Set ultrasonic cleaning time.
2. Use ▲ or ▼ to adjust time.
3. Set temperature using ▲ or ▼ (0–80°C).
4. Press START/STOP to begin cleaning.

6. WARNINGS
 Read the manual before use.
 Ensure proper grounding at all times.
 Do not use flammable, volatile or explosive solutions.
 Do not run the machine without water.
 Do not exceed 80°C solution temperature.
 This machine should not be used by unsupervised children.
 Avoid touching the solution or placing fingers inside during operation.
7. SERVICE and MAINTENANCE
Perform periodic checks:
 Tightness and dryness of power connections
 Mesh enclosure of cooling fan (clean dust regularly)
 Tank sealing and drainage valve
 Any loose or vibrating components
Contact your supplier if the ultrasonic oscillator or power tube shows signs of malfunction.

8. PACKING LIST
 Ultrasonic Cleaning Machine – 1
 Instruction Manual – 1
 Stainless Steel Basket – 1
 Power Cable – 1
 Drainage Pipe – 1

For more details, please feel free to contact us